Removal Procedure
Notice: Cap the fittings and plug the holes when servicing the fuel system in
order to prevent dirt and other contaminants from entering the open
pipes and passages.
- Remove the fuel pump module. Refer to
Fuel Pump Module Replacement
.
- Depress the retaining tab on the fuel level sensor and begin to slide the sensor away from the pump module.
- Carefully slide the sensor the rest of the way off of the pump module.
Installation Procedure
- Carefully slide the fuel level sensor into the slots on the fuel pump module bowl.
- Secure the retaining tab on the sensor into the slot on the pump module bowl.
- Install the fuel pump module. Refer to
Fuel Pump Module Replacement
.