Step | Action | Yes | No | ||||||
|---|---|---|---|---|---|---|---|---|---|
1 | Did you review the General Description and perform the necessary inspections? | Go to Step 2 | |||||||
2 |
Important: Verify the vehicle suspension package RPO. Verify that the ride is too soft or too hard. Does the vehicle ride normally? | System OK | Go to Step 3 | ||||||
3 | Check the tire inflation and adjust to specifications. Refer to Vehicle Certification, Tire Placard, Anti-Theft, and Service Parts ID Label . Did you adjust the tire pressure? | Go to Step 6 | Go to Step 4 | ||||||
4 | Inspect the vehicle trim height. Refer to Trim Height Inspection . Did you find and correct the condition? | Go to Step 6 | Go to Step 5 | ||||||
5 | Inspect the following suspension components for wear or damage.
Did you complete the inspection and make any corrections? | Go to Step 6 | Go to Step 7 | ||||||
6 | Replace all of the work or damaged components.
Did you complete the replacement of the damaged components? | Go to Step 7 | -- | ||||||
7 | Drive the vehicle in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
