The keyless entry system is a supplementary vehicle entry device. Radio frequency
interference or discharged batteries may disable the system.
Keyless entry allows you to operate the following features:
| • | The rear compartment lid release--Press and release rear release
button to activate. |
| • | The illuminated entry lamps |
The keyless entry system has the following main components:
| • | The keyless entry transmitters |
| • | The body control module (BCM) |
| • | The remote control door lock receiver (RCDLR)--When a button is pressed
on the transmitter, the transmitter sends an RF signal to the RCDLR. The RCDLR receives
the signal and sends a serial data message requesting the appropriate function from
the BCM. |
Unlock Driver Door Only
Momentarily press the UNLOCK button in order to perform the following functions:
| • | Unlock the driver door only. |
| • | Illuminate the interior lamps for approximately 20 seconds or
until the ignition is turned ON. |
| • | Flash the park lamps if the ignition is turned OFF and the doors are closed. |
Unlock All Doors - Second Operation
Momentarily press the UNLOCK button a second time, within 5 seconds of
the first press, in order to perform the following functions:
| • | Unlock all of the doors. |
| • | Illuminate the interior lamps for approximately 20 seconds or
until the ignition is turned ON. |
Lock All Doors
Press the LOCK button in order to perform the following functions:
| • | Immediately turn OFF the interior lamps. |
| • | Flash the park lamps if the ignition is OFF and the doors are closed. |
| • | Chirp the horn if the ignition is OFF and the doors are closed. |
Panic Alarm
The horn will sound 3 times and the headlamps and parking lamps will
flash 3 times. Press and hold the button for 3 seconds to sound the
panic alarm. The horn will sound and the headlamps and parking lamps will flash for
30 seconds. Press the button again to cancel the panic alarm.
