Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Remove the intake manifold. Refer to Intake Manifold Replacement .

1

Nut, Starter Solenoid Terminal

Tighten
10 N·m (89 lb in)

2

Terminal, Positive Battery Cable

3

Nut, Starter Solenoid "S" Terminal

Tighten
3 N·m (27 lb in)

4

Terminal, Engine Harness

5

Terminal, Engine Harness

6

Bolt, Starter Motor (Qty: 2)

Tighten
40 N·m (30 lb ft)

7

Motor, Starter