Your vehicle may have a content theft-deterrent alarm system.
Arming the System
With the ignition off, you can arm the system by doing any one of the following:
| • | Press the remote keyless entry transmitter lock button. |
| • | Press the power door lock switch while the driver's door is open. |
The system will arm after either of these things occur:
| • | Thirty seconds after all the doors are closed. |
| • | Sixty seconds with any door open. |
If you press the lock button on the transmitter a second time while all the doors are closed, the system will arm immediately. The system will still arm in 60 seconds if a door is open. When the open door is closed, it will also become armed.
The security light, located on the instrument panel cluster, will turn on to indicate that arming has been initiated. Once the system is armed, the security light will flash once every three seconds.
If the security light is flashing twice per second, this means that a door is open.
If you do not want to arm the system, you may lock the car with the manual lock knobs on the doors.
Disarming the System
You can disarm the system by doing any one of the following:
| • | Press the remote keyless entry transmitter unlock button. |
| • | Turn the ignition on. |
If the system is armed and the trunk is opened using the trunk release button on the transmitter, the system will temporarily disarm itself and re-arm when the trunk has been closed. This allows you to exit the vehicle, lock the doors using the transmitter, and open the trunk using the transmitter without having to disarm and re-arm the system.
Once the system is disarmed, the security light will stop flashing.
How the System Alarm is Activated
If the system is armed, it can be activated by either:
| • | Opening the driver's door or trunk. This will cause a ten second pre-alarm chirp followed by a thirty second full alarm of horn and lights. |
| • | Opening any other door. This will immediately cause a full alarm of horn and lights for thirty seconds. |
When an alarm event has finished, the system will re-arm itself automatically.
How to Turn Off the System Alarm
To turn off the system alarm, do one of the following:
| • | Press the lock button on the remote keyless entry transmitter. The system will then re-arm itself. |
| • | Press the unlock button on the remote keyless entry transmitter. This will also disarm the system. |
| • | Insert the key in the ignition and turn it on. This will also disarm the system. |
How to Detect a Tamper Condition
If you hear three chirps when you press the unlock, lock, or trunk release buttons on the remote keyless transmitter, it means that the content theft security system alarm was previously activated.
