CAM COVER GASKET LEAKS OIL (INSTALL NEW CAM COVER GASKET)

SUBJECT: CAM COVER GASKET OIL LEAKS (INSTALL NEW CAM COVER GASKET)

VEHICLES AFFECTED: 1992 PONTIAC LEMANS (T-CAR) WITH 1.6L ENGINE

Recently a new Cam Cover Gasket, P/N 90354545 replacing P/N 90323853 on 1992 Pontiac LeMans with 1.6L engine was released for Production for increased engine durability. The new gasket is polymer coated to prevent oil leakage at the gasket interface. Whenever it becomes necessary to replace the Cam Cover Gasket, the new polymer coated gasket should be used.

Gasket replacement should be performed according to the LeMans Service Manual procedure.

The new gasket is currently available from CANSPO.

For vehicles being repaired under warranty use:

Labour Operation Number: J0318 Labour Number : 0.4 Hour

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.