GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Pontiac
🢒
2006
🢒
Montana SV6 - AWD
🢒
General Information
🢒
General Information
🢒 Automatic Level Control Relay Replacement
Removal Procedure
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Remove mounting screw (1) from the automatic level control relay.
Disconnect electrical connector (1) from the automatic level control relay (2).
Installation Procedure
Connect electrical connector (1) into the automatic level control relay (2).
Notice:
Refer to
Fastener Notice
in the Preface section.
Install mounting screw (1) into the automatic level control relay.
Tighten
Tighten screw to 6 N·m (53 lb in).
Lower the vehicle.