Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Disconnect the connectors.
- Remove the transaxle control mode (TCM) mounting bolts and TCM.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the transaxle control module (TCM) mounting bolts and TCM.
Tighten
Tighten the mounting bolts to 6 N·m (53 lb in).
- Connect the connectors.
- Connect the negative battery cable.
- Refer to
Control Module References for programming and setup information.