GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2008 🢒 Grand Prix 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Link Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

    2. Object Number: 1208429 Size: SH
  2. Disconnect the stabilizer link from the stabilizer shaft.

    3. Object Number: 1208425 Size: SH
  3. Disconnect the stabilizer link from the strut assembly and remove from the vehicle.

Installation Procedure

    Object Number: 1208425 Size: SH
  1. Connect the stabilizer link to the strut assembly.

    2. Object Number: 1208429 Size: SH
  2. Using the appropriate tool, hold the stud links so as not to allow them to rotate while tightening the stabilizer link nuts to the specifications.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Connect the stabilizer link to the stabilizer shaft.

    4. Tighten
    Tighten the stabilizer link nuts to 60 N·m (44 lb ft).

  4. Lower the vehicle.