GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 Grand Prix 🢒 Body Systems 🢒 Fixed and Moveable Windows 🢒 Front Side Door Window Replacement

Removal Procedure

    Object Number: 797960 Size: SH

    Notice: To avoid paint damage, protect the area surrounding the part which you are removing or installing.

  1. Apply masking tape to the outer applique and frame.
  2. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  3. Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  4. Remove the front door inner window belt sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement .
  5. Raise the window far enough in order to gain access to the bolts (2) that attach the window to the regulator.

    6. Remove the bolts (2) that attach the window to the regulator.

  6. Lower the window regulator to the full down position.
  7. Remove the window (1) from the door.

Installation Procedure

    Object Number: 797960 Size: SH
  1. Position the window in between the inner and the outer panels.
    2. 1.1. Point the lower front corner of the front door window down.
    1.2. Pass the front door window through the belt opening.
    1.3. Align the edges of the window with the door window weatherstrip.
    1.4. Ensure that both sealing lips on the front door outer belt sealing strip are not rolled over and pointing downward.

    If this condition is present, the window will not raise properly.

  2. Raise the window regulator to the middle position.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the forward window guide channel bolts (2) that attach the window to the regulator.

    4. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  4. Install the rearward window guide channel bolts (2) that attach the window to the regulator.

    5. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  5. Remove the masking tape.
  6. Inspect the window for proper operation.
  7. Install the front door inner belt sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement .
  8. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
  9. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .