GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 813387  Size: SH
  1. Remove the mirror face. Refer to Outside Rearview Mirror Glass Replacement .
  2. Remove the screws from the mirror motor.

  3. Object Number: 813389  Size: SH
  4. Disconnect the electrical connectors from the rear of the mirror motor.
  5. Note the position of the plugs on the mirror motor when removing.

  6. Remove the motor .

Installation Procedure


    Object Number: 813389  Size: SH
  1. Position the motor to the mirror housing.
  2. Connect the electrical connector to the rear of the mirror motor.
  3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 813387  Size: SH
  4. Install the screws to the mirror motor.
  5. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  6. Install the mirror face to the mirror housing. Refer to Outside Rearview Mirror Glass Replacement .
  7. Inspect the mirror for proper operation.