GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 Grand Prix 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Transmission Control Module Replacement

Transmission Control Module Replacement 3.8L


Object Number: 1617083 Size: MF

Callout

Component Name

Preliminary Procedures

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the air cleaner housing. Refer to Air Cleaner Assembly Replacement .
  3. Position the powertrain control module out of the way. Refer to Powertrain Control Module Replacement .

1

Transmission Control Module (TCM).

Tip

    • Disconnect the TCM electrical connector.
    • If installing a new TCM, program the TCM. Refer to Control Module References .
    • It is recommended that transmission adaptive pressure (TAP) information be reset. Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to relearn TAP values. Transmission performance may be affected as new TAP values are learned. Reset the TAP values. Refer to Transmission Adaptive Functions .

Transmission Control Module Replacement 5.3L


Object Number: 1617088 Size: MF

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the air cleaner housing. Refer to Air Cleaner Assembly Replacement .
  3. Position the engine control module (ECM) out of the way. Refer to Engine Control Module Replacement .

1

Transmission Control Module (TCM)

Tip

    • Disconnect the TCM electrical connector.
    • If installing a new TCM, program the TCM. Refer to Control Module References .
    • It is recommended that transmission adaptive pressure (TAP) information be reset. Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, powertrain control module (PCM) or TCM will need to relearn TAP values. Transmission performance may be affected as new TAP values are learned. Reset the TAP values. Refer to Transmission Adaptive Functions .