Removal Procedure
Caution: Refer to SIR Caution in the Preface section.
- Disable the SIR System. Refer to
SIR Disabling and Enabling
.
- Remove the retaining screws (1) from the steering wheel radio controls.
- Remove the steering wheel radio controls (2).
- Disconnect the electrical connectors from the radio control switches.
- Remove the screws from the automatic transmission shift auxiliary position switches (1).
- Disconnect the electrical connectors.
- Remove the automatic transmission shift auxiliary position switches (2).
Installation Procedure
- Install the automatic transmission shift auxiliary position switches (2).
- Connect the electrical connectors.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws to the automatic transmission shift auxiliary position switches (1).
Tighten
Tighten the automatic transmission shift auxiliary position switch retaining screws to 3.5 N·m (31 lb in).
- Connect the electrical connectors to the radio control switches (2).
- Install the steering wheel radio controls (2).
- Install the retaining screws (1) to the steering wheel radio controls (2).
Tighten
Tighten the radio control retaining screws to 3.5 N·m (31 lb in).
- Enable the SIR System. Refer to
SIR Disabling and Enabling
.