Customers may comment about paint rubbing off the top inner portion of the door where it may come in contact with the body lock pillar applique. The following procedure can be used to repair this condition:
1. Remove body lock pillar applique, if damaged.
2. Color coat applique and door (damaged portion) if required.
3. Install body lock pillar applique.
4. Install P/N 10144901 - Clear urethane adhesive film on door inner panel vertically as shown in the figure.
Parts are expected to be available on April 10, 1989. Until then normal part orders will not be accepted by GMSPO. Only verifiable emergency VIP orders will be accepted. SPO will make every effort to obtain parts. All parts will be placed on 400 control to waive VIP surcharges. However, the part will be shipped premium transportation at dealer's expense. All other order types will be canceled as incorrectly ordered while the 400 control is in place.
Labor Operation Number: T1423
Labor Time : .2 Hour
Add : .2/GA To Color Coat
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.