Table 1: | Body Control Module (BCM) |
Table 2: | Instrument Panel Cluster (IPC) |
Table 3: | Powertrain Control Module (PCM) |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Ignition Switch in RUN/Engine running/Automatic Transmission in PARK/Air Conditioner is OFF | |||
Coolant Level | BCM Data | OK/Low | OK |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Ignition Switch in RUN/Engine running/Automatic Transmission in PARK/Air Conditioner is OFF | |||
High Coolant Temp Lamp | IPC Data | On/Off | Off |
Low Coolant Lamp | IPC Data | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Ignition Switch in RUN/Engine running/Automatic Transmission in PARK/Air Conditioner is OFF | |||
ECT Sensor | Eng 1, Eng 2, EGR, EVAP, Fuel Trim, Misfire | °C/°F | Varies |
FC Relay 1 Circuit Status | Output Driver | Fault/OK | OK |
FC Relay 1 Command | Eng 2 | On/Off | Off |
FC Relay 2 and 3 Circuit Status | Output Driver | Fault/OK | OK |
FC Relay 2 and 3 Command | Eng 2 | On/Off | Off |
Table 1: | Body Control Module (BCM) |
Table 2: | Instrument Panel Cluster (IPC) |
Table 3: | Powertrain Control Module (PCM) |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Ignition Switch in RUN/Engine running/Automatic Transmission in PARK/Air Conditioner is OFF | |||
Coolant Level | BCM Data | OK/Low | OK |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Ignition Switch in RUN/Engine running/Automatic Transmission in PARK/Air Conditioner is OFF | |||
High Coolant Temp Lamp | IPC Data | On/Off | Off |
Low Coolant Lamp | IPC Data | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
---|---|---|---|
Ignition Switch in RUN/Engine running/Automatic Transmission in PARK/Air Conditioner is OFF | |||
ECT Sensor | Engine Data 1, Engine Data 2, EGR, EVAP, Fuel Trim, Misfire | °C/°F | Varies |
FC Relay 1 Command | Engine Data 2 | On/Off | Off |
FC Relay 2 Command | Engine Data 2 | On/Off | Off |