LOWER I/P COMPARTMENT DOOR FIT (TRIM RIGHT I/P TRIM PLATE)

SUBJECT: LOWER I/P COMPARTMENT DOOR FIT (TRIM RIGHT I/P TRIM PLATE AND REPOSITION SUPPORT)

MODELS AFFECTED: 1992-93 GRAND AM MODELS

CONDITION:

--------- Some owners of 1992-93 Grand Am models built prior to breakpoints PM741418 or PC554653 may comment on a condition where the lower I/P compartment does not appear to be flush with the instrument panel.

CORRECTION:

---------- 1. Remove right I/P trim plate as outlined in Section 8C of the service manual.

2. Remove material from the right I/P trim plate as shown in Figure 1.

3. Finish surface with a fine file.

4. Loosen the center support to I/P screw.

5. With hand pressure, press I/P forward as far as the center support hole will allow and tighten. Refer to Figure 2.

6. Reinstall right I/P trim plate as outlined in the service manual.

Labor Operation Number: T1954

Labor Time: 0.6 Hours

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.