INFO ON NEW SPEC TOOL J28467- 330 ENG SUPPORT FIXTURE ADAPT

Subject: INFORMATION ON NEW SPECIAL TOOL J28467-330 ENGINE SUPPORT FIXTURE ADAPTER Models Affected: 1992-93 GRAND AM MODELS W/3.3L (VIN N, RPO LG7) AUTOMATIC

THIS BULLETIN IS BEING REVISED TO INCLUDE THE 1993 MODEL YEAR. THIS BULLETIN CANCELS AND REPLACES BULLETIN 92-6-53 ISSUED 7/92. PLEASE DISCARD BULLETIN 92-6-53.

SERVICE INFORMATION:

- Use J 28467-330 Engine Support Fixture Adapter for supporting the engine when servicing engine/transmission components.

- To use J 28467-330 adapter:

1. Loosen pilot bolts on both ends of adapter. 2. Place pilot bolts in holes in tie bar, refer to Figure 1-View B. 3. Tighten pilot bolts. 4. Attach J 28467-A to strut towers and place the leg of J28467-A on adapter as shown in Figure 1. 5. Attach engine support hooks to engine support fixture and engine lift hooks.

NOTICE: Failure to use J 28467-330 in conjunction with J 28467-A to support engine may cause damage to body or engine components.

- J28467-330 Engine Support Fixture Adapter tool was scheduled to be delivered to dealers on 7-1-92.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.