--------- Some owners of 1992 Pontiac Grand Am vehicles may experience a condition where the retaining clips strip out of the cluster cover and remain in the Instrument Panel (I/P) . Most locations may now be repaired, allowing the cover to be repaired instead of replaced. Refer to illustration.
CORRECTION: With I/P Cover Removed: ---------------------------------- 1. Remove the plastic boss so that it is flush with the cover.
2. Insert screw P/N 12337913 through the hole with the hex head inside the cover (#3 of attachment).
3. Insert clip P/N 11505100 (#4) between the legs of the retaining clip P/N 22580106 (#5).
4. Install dual clip combination over screw (#3) and tighten until fully driven, seated, not stripped.
P/N 12337913 - Screw
P/N 11505100 - Clip
Parts are expected to be available on June 29, 1992. In case of limited inventory, parts will be placed on 400 control to waive VIP: surcharges. Only verifiable emergency VIP orders will be accepted. SPO will make every effort to obtain parts. However, the part will be shipped premium transportation at dealer's expense and all other order types will be placed on backorder until the 400 control is removed.
Labor Operation Number: C2450 Labor Time: .2 Hour
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.