GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Brakes 🢒 Park Brake 🢒 Park Brake Hardware Replacement

Removal Procedure
  1. Remove the rear brake rotor. Refer to Rear Brake Rotor Replacement in Disc Brakes.
  2. Remove the park brake shoe. Refer to Parking Brake Shoe Replacement .

    3. Object Number: 1351800 Size: SH
  3. Use a flat-bladed tool in order to remove the shoe spring (1) from the shield.

    4. Object Number: 1351790 Size: SH
  4. Remove the following components:
    5. • The adjusting screw (1)
    • The adjusting nut (2)
    • The pushrod (7)
    • The washer (6)
    • The adjuster tappet (5)

Installation Procedure

    Object Number: 1351790 Size: SH
  1. Apply GM Vehicle Care® Dri-Slide Lubricant, GM P/N 1052948, or the equivalent lithium molybdenum disulphide lubricant, to the following components:
    2. • The adjusting screw (1)
    • The adjusting nut (2)
    • The pushrod (7)
  2. Assemble the adjuster.
  3. Install the shoe spring and the park brake shoe. Refer to Parking Brake Shoe Replacement .
  4. Install the rear brake rotor. Refer to Rear Brake Rotor Replacement in Disc Brakes.