Removal Procedure
- Ensure that the radio is turned off.
- Remove the door trim panel. Refer to
Door Trim Panel Replacement
in Doors.
- Remove the door speaker-to-speaker box retaining
screws (1).
- Remove the speaker from the speaker box.
- Disconnect the speaker electrical connector (2).
- Remove the speaker from the vehicle.
Installation Procedure
- Position the speaker in the vehicle.
- Connect the speaker electrical connector
(2)
Notice: Refer to Fastener Notice in the Preface section.
- Install the door speaker-to-speaker box retaining screws (1).
Tighten
Tighten the speaker retaining screws to 2 N·m (18 lb in).
- Install the door trim panel. Refer to
Door Trim Panel Replacement
in Doors.