For 1990-2009 cars only
Removal Procedure
- Push the locking tang (6) at the end of the lamp housing (5) towards the lens.
- Pivot the housing (5) down and remove it from the aperture (1).
- Remove the bulb socket (2) from the lamp housing (5).
- Remove the bulb (3) from the bulb socket (2), if necessary.
Installation Procedure
- Install the bulb (3) to the bulb socket (2), if removed.
- Install the bulb socket (2) to the lamp housing (5).
- Pivot the lamp housing (5) down into the aperture (1).
- Push down on the lamp housing (5) until the locking tang (6) fastens.
