GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Body 🢒 Interior Trim 🢒 Body Hinge Pillar Trim Panel Replacement

Removal Procedure
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
  2. Remove the front seat adjuster outer cover. Refer to Seat Cushion Outer Trim Panel Replacement .
  3. Remove the door sill plate. Refer to Door Sill Plate Replacement .

    4. Object Number: 1355761 Size: SH
  4. Remove 2 hinge pillar trim panel retaining screws (1).
  5. Disengage the hinge pillar trim panel retaining clip (2), by pulling the lower edge of the trim panel assembly rearward.
  6. Remove the trim panel from the vehicle.

Installation Procedure

    Object Number: 1355761 Size: SH
  1. Position the trim panel in the vehicle.
  2. Engage the hinge pillar trim panel retaining clip (2).

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install 2 hinge pillar trim panel retaining screws (1).

    4. Tighten
    Tighten the hinge pillar trim panel retaining screws to 1 N·m (9 lb in).

  4. Install the front seat adjuster outer cover. Refer to Seat Cushion Outer Trim Panel Replacement .
  5. Install the door sill plate. Refer to Door Sill Plate Replacement .
  6. Position the seat as necessary.
  7. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.