GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Body 🢒 Doors 🢒 Door Inside Handle Bracket Replacement

Removal Procedure

    Object Number: 1351935 Size: SH
  1. Remove the door energy absorber pad. Refer to Energy Absorber Pad Replacement .
  2. Remove the 4 screws (3) attaching the inside handle bracket (1) to the trim panel (2).
  3. Remove the inside handle bracket (1) from the vehicle.
  4. Remove the cover (4) from the inside handle bracket (1), if necessary.

Installation Procedure

    Object Number: 1351935 Size: SH
  1. Install the cover (4) to the inside handle bracket (1), if removed.
  2. Install the inside handle bracket (1) to the trim panel (2).

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the 4 screws (3) securing the inside handle bracket (1).

    4. Tighten
    Tighten the screws to 1.5 N·m (13 lb in)

  4. Install the energy absorber pad. Refer to Energy Absorber Pad Replacement .