GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Body 🢒 Doors 🢒 Front Side Door Window Belt Outer Sealing Strip Replacement

Removal Procedure

    Object Number: 1343965 Size: SH
  1. Lower the window assembly.
  2. Remove the door outer belt sealing strip assembly retaining screw (1).
  3. Starting at the rear of the door, gently pull the door outer belt sealing strip (2) in an upward direction form the door and slide the sealing strip (2) out from underneath the rear view mirror assembly.

Installation Procedure

    Object Number: 1343965 Size: SH
  1. Slide the door outer belt sealing strip (2) under the rear view mirror assembly.
  2. Align the rear of the door outer belt sealing strip (2) with the rear of the door.
  3. Install the front door outer belt sealing strip (2) to the front door pinch-weld flange pressing into place until fully seated

    4. Notice: Refer to Fastener Notice in the Preface section.

  4. Install the retaining screw (1) to the front door outer belt sealing strip.

    5. Tighten
    Tighten the outer belt sealing strip screw to 2 N·m (17 lb in).