GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Body 🢒 Doors 🢒 Power Mirror Switch Replacement

Removal Procedure

    Important: When removing a power mirror switch, the ignition switch must be in the OFF position. This will eliminate the possibility of shorting out the power mirror switch when using a metal tool to remove the power mirror switch from the wiring harness.

  1. Remove the door trim panel. Refer to Door Trim Panel Replacement .

    2. Object Number: 1351059 Size: SH
  2. Disengage the electrical connectors from the power mirror switch (1).
  3. From behind the door trim panel, push the power mirror switch (1) free by depressing the tabs.

Installation Procedure

    Object Number: 1351059 Size: SH
  1. Install the power mirror switch (1) to the door trim panel.
  2. Connect the electrical connector to the power mirror switch (1).
  3. Install the door trim panel. Refer to Door Trim Panel Replacement .