GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Body 🢒 Doors 🢒 Door Striker Replacement

Removal Procedure

    Object Number: 1337885 Size: SH
  1. Mark the position of the striker (3) with a grease pencil.
  2. Remove the screws (1) from the door lock striker (2).
  3. Remove the door lock striker (2) and the shims.

Installation Procedure

    Object Number: 1337958 Size: SH
  1. Install the door lock shims (3) and striker (2).
  2. Install the striker screws (4).
  3. Align the door lock striker to the alignment marks making sure the bridge of the striker locates centrally in the door lock assembly (1) as the door is being closed.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Tighten the door lock striker screws (4).

    5. Tighten
    Tighten the striker screws to 13 N·m (10 lb ft).