GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Body 🢒 Doors 🢒 Armrest Replacement

Removal Procedure

    Object Number: 1351894 Size: SH
  1. Remove the door energy absorber pad. Refer to Energy Absorber Pad Replacement .
  2. Remove the 5 clips (3), by sliding them away from the trim panel (1).
  3. Remove the 7 nuts (2), attaching the armrest (4) to the trim panel (2).
  4. Slide the armrest (4) to the rear of the trim panel (1) and remove.

Installation Procedure

    Object Number: 1351894 Size: SH

    Important: The armrest (4) must be sitting flush against the trim panel (1), along the entire top contacting surface.

  1. Install the armrest (4) to the trim panel (1), and slide forward.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the 7 nuts (2) attaching the armrest (4) to the trim panel (1).

    3. Tighten
    Tighten the nuts to 8 N·m (71 lb in).

  3. Install the 5 retaining clips (3), to the armrest (4).
  4. Install the energy absorber pad. Refer to Energy Absorber Pad Replacement .