GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 GTO 🢒 Engine 🢒 Engine Electrical 🢒 Cruise Control Release Switch Replacement

Removal Procedure

    Object Number: 1582869 Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the left closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  3. Remove the left ventilation ducts. Refer to Instrument Panel Air Outlet Ducts Replacement .
  4. Remove the stop lamp switch. Refer to Stop Lamp Switch Replacement .
  5. Press the connector locking tab while pulling on the cruise control switch electrical connector (1) and remove from the switch assembly (2).

    6. Object Number: 1582876 Size: SH
  6. Turn the cruise control release switch assembly (1) counterclockwise 90 degrees and pull out of brake pedal support.
  7. If required, press the locking tabs on the rear of the cruise release switch retaining clip (2) and remove.

Installation Procedure

    Object Number: 1582876 Size: SH
  1. If removed, install the cruise release switch retaining clip (2) with the arrow pointing upward.
  2. Install the cruise release switch into the brake pedal support so the switch connectors face upwards.
  3. Adjust the cruise release switch. Refer to Cruise Release Switch Adjustment .
  4. Install the stop lamp switch. Refer to Stop Lamp Switch Replacement .
  5. Install the left ventilation ducts. Refer to Instrument Panel Air Outlet Ducts Replacement .
  6. Install the left I/P lower insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .