Rear Quarter Glass Alignment/Scissoring Concern - keywords air convertible contact door front leak molding noise seal scissor strip weather wind

This PI was superseded to include the important note of the available IDLs. Please discard PIC4150A.

The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.

A condition could exist when raising the driver or passenger front windows. The front door glass may ride up on the inside of the rear 1/4 glass seal. This condition is considered a scissoring effect. If left unaddressed it could damage or pop off the rear 1/4 glass molding.

If you notice this condition it will be necessary to adjust the front door glass rear tip in. Please reference SI-2000 DOC# 1836400 (Front Side Door Window and Quarter Window Adjustment) to assist you in making the proper adjustments for this condition.

Important:: For additional information on this issue please reference IDL Course Numbers 12442.10V and 10206.13D

Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.