Rear Compartment Lid Strut Replacement. Pontiac G6 2007

For 1990-2009 cars only

Makes 🢒 Pontiac 🢒 2007 🢒 G6 🢒 Body Repair 🢒 Bolted Exterior Body Panels and Closures 🢒 Rear Compartment Lid Strut Replacement

Rear Compartment Lid Strut Replacement Coupe/Sedan

Callout	Component Name
1	Rear Compartment Lid Strut Rod Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. Notice: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result. Tip Remove the metal clip at the ends of the strut rod, then pull away from the stud.

Callout

Component Name

Rear Compartment Lid Strut Rod

Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Notice: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.

Tip
Remove the metal clip at the ends of the strut rod, then pull away from the stud.

Rear Compartment Lid Strut Replacement Convertible

Callout	Component Name
1	Rear Compartment Hinge Strut (Qty: 1) Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. Notice: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result. Tip Remove the metal clip at the ends of the assist rod and then pull away from the stud.

Callout

Component Name

Rear Compartment Hinge Strut (Qty: 1)

Caution: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Notice: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.

Tip
Remove the metal clip at the ends of the assist rod and then pull away from the stud.