Preliminary Procedures

1. Place the folding top in the service position. Refer to Folding Top Retainer Strap Installation Position .
2. Remove the windshield upper garnish molding. Refer to Windshield Upper Garnish Molding Replacement .

1

Folding Top Front Location Pin Guide Bolt (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Mark the location of the guide with a grease pencil before removing.

Tighten
10 N·m (89 lb in)

2

Folding Top Front Location Pin Guide

Tip
Place the guide shim under the receiver before reinstalling the bolts.