Preliminary Procedures

Place the folding top in the service position. Refer to Folding Top Retainer Strap Installation Position .

1

Folding Top Front Location Pin Stowage Bumper Screws (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
10 N·m (89 lb in)

Tip
Disconnect the electrical connector and switch from the bumper. Refer to Folding Top Front Locating Pin Position Switch Replacement .

2

Folding Top Front Location Pin Stowage Bumper Pin

3

Folding Top Front Location Pin Stowage Bumper

Tip
Mark the location of the part with a grease pencil before removing.