Rear Compartment Lid Release Switch Replacement - Hinge Bracket. Pontiac G6 2006

For 1990-2009 cars only

Makes 🢒 Pontiac 🢒 2006 🢒 G6 🢒 Body 🢒 Roof 🢒 Rear Compartment Lid Release Switch Replacement - Hinge Bracket

Callout	Component Name
Preliminary Procedure Open the rear compartment lid.
1	Rear Compartment Lid Release Switch Screws Notice: Refer to Fastener Notice in the Preface section. Tip There are switch located on the left and right sides of the upper bracket. Tighten 2 N·m (18 lb in)
2	Rear Compartment Lid Release Switch Tip Disconnect the electrical connector.

Callout

Component Name

Open the rear compartment lid.

Rear Compartment Lid Release Switch Screws

Notice: Refer to Fastener Notice in the Preface section.

Tip
There are switch located on the left and right sides of the upper bracket.

Tighten
2 N·m (18 lb in)

Rear Compartment Lid Release Switch

Tip
Disconnect the electrical connector.