Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Position the rear door window approximately half way down in the door.
2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
3. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement .
4. Remove the rear door window retaining pin. Refer to Rear Side Door Window Regulator Replacement .
5. Push the window to the full up position and tape it in place.

1

Rear Door Window Regulator Bolts (Qty: 3)

Tighten
10 N·m (89 lb in)

2

Rear Door Window Regulator

Tip
Disconnect the electrical connector.