Radiator Surge Tank Inlet Hose/Pipe Replacement LE5

Tools Required

J 38185 Hose Clamp Pliers

Caution: With a pressurized cooling system, the coolant temperature in the radiator can be considerably higher than the boiling point of the solution at atmospheric pressure. Removal of the surge tank cap, while the cooling system is hot and under high pressure, causes the solution to boil instantaneously with explosive force. This will cause the solution to spew out over the engine, the fenders, and the person removing the cap. Serious bodily injury may result.

1. Reposition the surge tank inlet hose clamp at the engine using the J 38185 .
2. Remove the surge tank inlet hose from the engine.



3. Reposition the surge tank inlet hose clamp at the surge tank using the J 38185 .
4. Remove the surge tank inlet hose from the surge tank.
5. Remove the surge tank inlet hose from the vehicle.

1. Install the surge tank inlet hose to the surge tank.
2. Reposition the surge tank inlet hose clamp at the surge tank using the J 38185 .



3. Install the surge tank inlet hose to the engine.
4. Reposition the surge tank inlet hose clamp at the engine using the J 38185 .
5. Fill the Cooling System. Refer to Cooling System Draining and Filling.

Radiator Surge Tank Inlet Hose/Pipe Replacement LX9

Tools Required

J 38185 Hose Clamp Pliers

Caution: With a pressurized cooling system, the coolant temperature in the radiator can be considerably higher than the boiling point of the solution at atmospheric pressure. Removal of the surge tank cap, while the cooling system is hot and under high pressure, causes the solution to boil instantaneously with explosive force. This will cause the solution to spew out over the engine, the fenders, and the person removing the cap. Serious bodily injury may result.

1. Reposition the surge tank inlet hose clamp at the engine using the J 38185 .



2. Remove the surge tank inlet hose from the engine.
3. Reposition the surge tank inlet hose clamp at the surge tank using the J 38185 .
4. Remove the surge tank inlet hose from the surge tank.
5. Remove the surge tank inlet hose clamps from the surge tank inlet hose.

1. Install the surge tank inlet hose clamps to the surge tank inlet hose.
2. Install the surge tank inlet hose to the surge tank.
3. Reposition the surge tank inlet hose clamp at the surge tank using the J 38185 .



4. Install the surge tank inlet hose to the engine.
5. Reposition the surge tank inlet hose clamp at the engine using the J 38185 .

Radiator Surge Tank Inlet Hose/Pipe Replacement LZ9

Tools Required

J 38185 Hose Clamp Pliers

Caution: With a pressurized cooling system, the coolant temperature in the radiator can be considerably higher than the boiling point of the solution at atmospheric pressure. Removal of the surge tank cap, while the cooling system is hot and under high pressure, causes the solution to boil instantaneously with explosive force. This will cause the solution to spew out over the engine, the fenders, and the person removing the cap. Serious bodily injury may result.

1. Reposition the surge tank inlet hose clamp at the engine using the J 38185 .
2. Remove the surge tank inlet hose from the engine.



3. Reposition the surge tank inlet hose clamp at the surge tank using the J 38185 .
4. Remove the surge tank inlet hose from the surge tank.
5. Remove the surge tank inlet hose from the vehicle.

1. Install the surge tank inlet hose to the surge tank.
2. Reposition the surge tank inlet hose clamp at the surge tank using the J 38185 .



3. Install the surge tank inlet hose to the engine.
4. Reposition the surge tank inlet hose clamp at the engine using the J 38185 .
5. Fill the Cooling System. Refer to Cooling System Draining and Filling .