GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 G3 🢒 Body Systems 🢒 Wipers and Washers 🢒 Windshield Washer Solvent Container and Pump Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.

  1. Disconnect the negative battery cable.
  2. Remove the front left wheel. Refer to Tire and Wheel Removal and Installation .

    3. Object Number: 1719817 Size: SH
  3. Remove the bolts and the front wheel well splash shield.

    4. Object Number: 1248438 Size: SH
  4. Disconnect the washer hoses from the reservoir.
  5. Disconnect the reservoir pump electrical connectors.
  6. Remove the bolts, the nuts and the reservoir.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1248438 Size: SH
  1. Install the reservoir with the nuts and the bolts.

    2. Tighten
    Tighten the washer fluid reservoir nuts and bolts to 9 N·m (80 lb in).

  2. Connect the reservoir pump electrical connectors.
  3. Connect the washer hoses to the reservoir.

    4. Object Number: 1719817 Size: SH
  4. Install the front wheel well splash shield with the bolts.

    5. Tighten
    Tighten the front wheel well splash shield bolts to 1.5 N·m (13 lb in).

  5. Install the front left wheel. Refer to Tire and Wheel Removal and Installation .
  6. Connect the negative battery cable.