SERVICE MANUAL UPDATE SEC. 10 HATCH PULL-DOWN RELEASE UNIT

WE SUGGEST BULLETIN #138112 AND THIS BULLETIN BE COMBINED INTO ONE PUBLISHED BULLETIN, TO GIVE THE TECHNICIAN COMPLETE INFORMATION IN ONE DOCUMENT. ALSO, PLEASE REFERENCE THIS BULLETIN IN THE 1991 SERVICE MANUALS UNDER SECTIONS 8A AND 10.

SERVICE MANUAL UPDATE

SECTION 10

THIS BULLETIN IS ISSUED TO INFORM DEALERS THAT INTERIM 1991 CHEVROLET CAMARO (VIN BREAKPOINT 173202) AND INTERIM 1991 PONTIAC FIREBIRD MODELS (VIN BREAKPOINT 240932) WILL BE RECEIVING A NEW HATCH PULL-DOWN/RELEASE UNIT. THE CONVERTIBLE MODELS WILL BE EQUIPPED WITH A NEW REAR COMPARTMENT LID LATCH ASSEMBLY.

THIS BULLETIN PROVIDES THE NECESSARY SERVICE MANUAL INFORMATION PERTAINING TO THE DIAGNOSTIC PROCEDURE, REPAIR PROCEDURES AND PART NUMBERS FOR COMPONENTS.

THIS BULLETIN ALSO PROVIDES LABOR OPERATION CODES, OPERATION DESCRIPTION AND LABOR TIMES THAT ARE APPLICABLE TO EACH REPLACEMENT PART.

IMPORTANT: USE GREASE, GM PART NUMBER 12345718 ONLY WHEN REPLACING PARTS. FAILURE TO DO SO WILL RESULT IN SHORTENED PART LIFE.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.

COPYRIGHT 1991 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.