TEXT ZONE
New 3-4 clutch plates (steel) are available for 1987-1990 HYDRA-MATIC 4L60 transmissions. The new clutch plates have a slightly smaller outer radius to let them move more freely in the clutch housing.
DATE OF PRODUCTION CHANGE:
Beginning July 27, 19 9 0 (Julian Date 208), all HYDRA-MATIC 4L60 transmissions were built using the new 3-4 clutch plates.
The new 3-4 clutch plates can be used to service any HYDRA-MATIC 4L60 transmission produced after February 9, 1987 (Julian Date 040).
SERVICE PARTS INFORMATION:
Description New Part ----------- -------- Plate - 3rd and 4th (steel - 4 or 5 needed) 8678053 Plate - 3rd and 4th (steel - 1 needed) 8678054
Parts are currently available from GMSPO.
SERVICE MANUAL REFERENCE:
Refer to the Automatic Transmission Unit Repair Section of the appropriate service manual for 3-4 clutch plate removal and installation information.
General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.