Step | Action | Yes | No |
|---|---|---|---|
1 | Did you review the Garage Door Opener Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 |
Important: If the vehicle is equipped with a valet switch verify that the switch is in the off position. Operate each button on the garage door opener one at a time. Do all three buttons illuminate the LED? | Go to Step 4 | Go to Step 3 |
3 | Do any buttons illuminate the LED? | Go to Step 8 | Go to Step 5 |
4 |
Does the J 43241 verify each button when pressed? | Go to Step 9 | Go to Step 8 |
5 | Test the garage door opener battery positive voltage circuit for an open, high resistance or a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 6 |
6 | Test the garage door opener ground circuit for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 7 |
7 | Inspect for poor connection at the garage door opener harness connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 8 |
8 | Replace the garage door opener. Did you complete the replacement? | Go to Step 9 | |
9 | Program the garage door opener. Refer to Garage Door Opener Programming - Universal . Did you complete the procedure? | Go to Step 10 | |
10 | Return the vehicle to the customer in order to verify the repair. Does the garage door opener operate properly for the customer? | System OK | Advise the customer to call HomeLink® at 800-355-3515 |
