GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2001 🢒 Intrigue 🢒 Body and Accessories 🢒 Personalization 🢒 Vehicle Personalization

Modes of Operation

Automatic Door Locks

The following are the modes of operation for the automatic door locks feature:

    • Mode 1:
        The automatic door locks feature is disabled.
    • Mode 2:
        All of the doors lock when the vehicle is shifted out of PARK with the ignition ON.
    • Mode 3: (Default)
        All of the doors lock when the vehicle is shifted out of PARK with the ignition ON. All of the doors unlock when the vehicle is shifted into PARK.
    • Mode 4:
        All of the doors lock when the vehicle is shifted out of PARK with the ignition ON. Only the driver door unlocks when the vehicle is shifted into PARK.

Delayed Locking

The following are the modes of operation for the delayed locking feature:

    • Mode 1:
        All of the doors lock 5 seconds after the last door is closed when the lock switch is activated.
    • Mode 2:
        Delayed locking is disabled.

Remote Activation Verification

The following are the modes of operation for the remote activation verification feature:

    • Mode 1: (Default)
        The remote activation verification feature is disabled.
    • Mode 2:
        The horn chirps when the LOCK button or the UNLOCK button on the keyless entry transmitter is pressed.
    • Mode 3:
        The exterior lamps flash when the LOCK button or the UNLOCK button on the keyless entry transmitter is pressed.
    • Mode 4:
        The exterior lamps flash and the horn chirps when either the UNLOCK button or the LOCK button on the keyless entry transmitter is pressed.

Programming Features

Enter Programming

To enter the programming mode, perform the following actions:

  1. Turn the ignition to RUN.
  2. Close all of the doors.

Automatic Door Locks

Continue with the following steps in order to personalize the automatic door locks:

  1. Press and hold the driver side power door lock switch.
  2. Shift the transmission out of PARK and then back into PARK.

    3. The vehicle will remain in the current mode and react according to the current mode settings (see Automatic Door Lock modes above).

  3. Cycle the transmission again in order to advance to the next mode. Again the vehicle will react according to the mode settings.
  4. Continue to cycle the transmission until the desired mode is reached.

Delayed Locking

Continue with the following steps in order to personalize the delayed locking feature:

  1. Press and hold the driver side power door unlock switch.
  2. Shift the transmission out of PARK and then back into PARK. The chime will sound a number of times equivalent to the mode number.
  3. Cycle the transmission again in order to advance to the next mode. Again the chime will sound a number of times equivalent to the mode number.
  4. Continue to cycle the transmission until the desired mode is reached.

Remote Activation Verification

Continue with the following steps in order to personalize the remote activation verification feature:

  1. Press and hold the driver side power door unlock switch (to personalize the remote unlock verification).
  2. Press the UNLOCK button on the desired transmitter.

    3. The vehicle will remain in the current mode. The chime will sound a number of times equivalent to the mode number.

  3. Press the UNLOCK button on the desired transmitter again in order to advance to the next mode. Again the chime will sound a number of times equivalent to the mode number.
  4. Continue to press the UNLOCK button on the desired transmitter until the desired mode is reached.
  5. Press and hold the driver side power door lock switch (to personalize the remote lock verification).
  6. Press the LOCK button on the desired transmitter.

    7. The vehicle will remain in the current mode. The chime will sound a number of times equivalent to the mode number.

  7. Press the LOCK button on the desired transmitter again in order to advance to the next mode. Again the chime will sound a number of times equivalent to the mode number.
  8. Continue to press the LOCK button on the desired transmitter until the desired mode is reached.

Exit Programming

The following list of events will cause the programming sequence to be terminated:

    • The ignition is moved from the RUN position.
    • A door is opened.

Programming Features with the Tech 2

To enter programming with the Tech 2 , perform the following actions:

  1. Install the scan tool.
  2. Turn ON the ignition with the engine OFF.
  3. Select the correct vehicle and model year.
  4. Select Body.
  5. Select Personalization.

Automatic Door Locks

Continue with the following steps in order to program the automatic door locks feature:

  1. Select Set Options.
  2. Select F0 for ADL (Auto Door Locks)
  3. Highlight the desired mode from the following choices (see Automatic Door Lock modes above for mode descriptions):
    4. • Mode 1: NO ADL.
    • Mode 2: ADL out of PARK, NO unlock.
    • Mode 3: ADL out of PARK, Unlock into PARK.
    • Mode 4: ADL out of PARK, Unlock driver door ONLY.
  4. Press the ENTER button to turn the mode ON or OFF. (You must turn the current mode OFF before you can turn another one ON.)
  5. Select Save Options.
  6. Exit the menu.

Last Door Closed Locking Mode

Continue with the following steps in order to program the LDCL (Last Door Closed Locking) Mode feature:

  1. Select Set Options.
  2. Select F1 for Last Door Closed Locking Mode.
  3. Highlight the desired mode for the following choices:
    4. • LCDL Disabled.
    • LCDL Enabled.
  4. Press the ENTER button to turn the mode ON or OFF. (You must turn the current mode OFF before you can turn another one ON.)
  5. Select Save Options.
  6. Exit the menu.

Remote Unlock Verification Mode

Continue with the following steps in order to program the Remote Unlock Verification Mode:

  1. Select Set Options.
  2. Select F2 for Remote Unlock Verification Mode.
  3. Highlight the desired mode for the following choices:
    4. • NO Unlock Verification
    • Horn Only
    • DRL Only
    • DRL and Horn
  4. Press the ENTER button to turn the mode ON or OFF. (You must turn the current mode OFF before you can turn another one ON.)
  5. Select Save Options.
  6. Exit the menu.

Remote Lock Verification Mode

Continue with the following steps in order to program the Remote Lock Verification Mode:

  1. Select Set Options.
  2. Select F3 for Remote Lock Verification Mode.
  3. Highlight the desired mode for the following choices:
    4. • No Lock Verification
    • Horn Only
    • DRL Only
    • DRL and Horn
  4. Press the ENTER button to turn the mode ON or OFF. (You must turn the current mode OFF before you can turn another one ON.)
  5. Select Save Options.
  6. Exit the menu.

Additional Information

For more information on the personalization features, refer to one of the following description and operations:

    • Refer to Power Door Locks Description and Operation in Doors for more information about the following features:
      • Automatic door locks
      • Delayed locking
    • Refer to Keyless Entry System Description and Operation in Keyless Entry for more information about the remote activation verification feature.