Sunroof Switch Replacement w/o Overhead Console

1. Grasp the switch on the left and right sides.

Important: Rotate the sunroof switch, pulled down on the left side, prior to removal.

2. Use a small, flat-bladed tool in order to disengage the clips which are located at the front and rear of the switch. Hold the flat-bladed tool parallel to the roof and push straight in. Rotate the sunroof switch toward the left side in order to disengage it from the mounting bracket and pull down.
3. Disconnect the electrical connector from the sunroof switch.
4. Remove the sunroof switch from the vehicle.

1. Connect the electrical connector to the sunroof switch.
2. Align the sunroof switch to the sunroof module.
3. Rotate the sunroof switch toward the right side in order to engage it to the mounting bracket.
4. Apply pressure to the sunroof switch until fully seated.