GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2001 🢒 Intrigue 🢒 Body and Accessories 🢒 Body Front End 🢒 Hood Rear Outer Seal Replacement

Removal Procedure

    Object Number: 456730 Size: SH
  1. Open the hood.
  2. Pull the rear side hood seal from the pinch-weld flange and engine compartment flange.
  3. Remove the rear side hood seal from the vehicle.
  4. Use 3M™ P/N 8984 Adhesive Remover to clean any adhesive from the pinch-weld flange and engine compartment flange surface.

Installation Procedure

    Object Number: 456730 Size: SH
  1. Remove the protective backing paper from the adhesive on the rear side hood seal.
  2. Install the rear side hood seal to the pinch-weld flange and engine compartment flange.
  3. Press the side rear hood seal onto the pinch-weld flange and engine compartment flange until the adhesive is fully adhered.
  4. Close the hood.