GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2001 🢒 Intrigue 🢒 Body and Accessories 🢒 Bumpers 🢒 Front Bumper Fascia Lower Support Replacement

Removal Procedure

    Object Number: 181780 Size: SH
  1. Remove the front bumper fascia lower support to fog lamp nuts.
  2. Remove the front bumper fascia screws from the front bumper fascia lower support.
  3. Remove the front bumper fascia lower support from the fog lamp.

Installation Procedure

    Object Number: 181780 Size: SH
  1. Install the front bumper fascia lower support to the fog lamp.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the front bumper fascia lower support to fog lamp nuts.

    3. Tighten
    Tighten the nuts to 10 N·m (89 lb in).

  3. Install the front bumper fascia screws to front bumper fascia lower support.

    4. Tighten
    Tighten the front bumper fascia screws to 2 N·m (18 lb in).