GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Did you perform the Diagnostic System Check for Engine Electrical?

--

Go to Step 2

Go to Diagnostic System Check - Engine Electrical

2

  1. Install a scan tool.
  2. Start the engine.
  3. Using a scan tool, observe the Ignition 1 parameter in the instrument panel cluster data list.

Does the voltage measure within the normal operating range?

10-15 V

Go to Step 3

Go to Charging System Test

3

Replace the instrument panel cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gages and Console.

Did you complete the replacement?

--

System OK

--