Removal Procedure
- Open the instrument panel
(IP) compartment door.
- Depress the retaining tabs on the top and bottom of the IP compartment
lamp switch.
- Carefully push the switch out of the opening and reposition the
switch.
- Disconnect the electrical connector from the IP compartment lamp
switch.
- Grasp the bulb, then pull to remove the bulb from the lamp switch.
Installation Procedure
- Install the bulb to the
IP compartment lamp switch.
- Connect the electrical connector to the IP compartment lamp switch.
- Position the IP compartment lamp switch into the opening in the
IP compartment. Press to secure the retaining tabs.
- Close the IP compartment door.