Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Exterior Lights Schematics | |||
1 | Did you perform the Lighting Systems Diagnostic System Check? | Go to Step 2 | |
2 | Ensure that the brake pedal is not depressed. Do the stop lamps remain OFF? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Disconnect the stop lamp switch. Do the stop lamps turn OFF? | Go to Step 4 | Go to Step 5 |
4 | Inspect the stop lamp switch adjustment. If necessary, readjust. Refer to Stop Lamp Switch Adjustment in Hydraulic Brakes. Is the stop lamp switch adjusted properly? | Go to Step 6 | Go to Step 7 |
5 | Repair a short to battery positive voltage in the stop lamp switch signal circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 7 | -- |
6 | Replace the stop lamp switch and adjust. Refer to Stop Lamp Switch Replacement and Stop Lamp Switch Adjustment in Hydraulic Brakes. Did you complete the replacement? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
