- Connect the inflatable
restraint IP module connector located to the right of the steering column.
- Install the connector position assurance (CPA) to the IP module
connector.
- Connect the inflatable
restraint steering wheel module coil connector located at the base of the
steering column.
- Install the CPA to the steering wheel module coil connector.
- Install the LH insulator panel.
- Install the AIR BAG Fuse.
- Install the RH IP cover.
- Staying well away from all inflator modules, turn ON the ignition.
8.1. | The AIR BAG indicator will flash seven times. |
8.2. | The AIR BAG indicator will then turn OFF. |
- Perform
Diagnostic System Check - SIR
if the AIR BAG indicator does not operate as described.