Application | Specification | |
---|---|---|
Metric | English | |
A/C Refrigerant Pressure Sensor | 5 N·m | 44 lb in |
Accelerator Bracket Bolt | 13 N·m | 115 lb in |
Accelerator Pedal Bolt | 3 N·m | 27 lb in |
Air Cleaner Housing Attaching Screw | 2 N·m | 18 lb in |
Air Cleaner Intake Duct Clamp | 2 N·m | 18 lb in |
Camshaft Position (CMP) Sensor Bolt | 6-12 N·m | 53-106 lb in |
Coolant Recovery Tank Mounting Nuts | 1 N·m | 9 lb in |
Crankshaft Balancer Bolt | 50 N·m +120 | 37 lb ft +120 |
Crankshaft Position (CKP) Sensor Bolt | 6-12 N·m | 53-106 lb in |
Exhaust Gas Recirculation (EGR) Inlet Pipe to Exhaust Manifold Nut | 50-70 N·m | 37-52 lb ft |
EGR Inlet Pipe to Intake Manifold Bolt | 20-28 N·m | 15-21 lb ft |
EGR Outlet Pipe to Intake Manifold Bolt | 20-28 N·m | 15-21 lb ft |
EGR Outlet Pipe to Water Pump Crossover Bolt | 8-12 N·m | 71-106 lb in |
EGR Valve to Water Pump Crossover Bolts | 4-14 N·m | 35-124 lb in |
Evaporative Emission (EVAP) Canister Purge Valve Retaining Bolt | 10 N·m | 89 lb in |
EVAP Canister Retaining Bolt | 6 N·m | 53 lb in |
EVAP Pipe Clip Screw | 5.8 N·m | 51 lb in |
EVAP Vent Valve Bracket Attaching Screw | 6 N·m | 53 lb in |
Engine Coolant Temperature (ECT) Sensor | 18-22 N·m | 13-16 lb ft |
Engine Fuel Pipe Retaining Clip | 7.5 N·m | 67 lb in |
Engine Oil Level Sensor Bolt | 6-12 N·m | 53-106 lb in |
Fuel Filler Pipe Attaching Screws | 10 N·m | 89 lb in |
Fuel Injector Harness Bolts | 9 N·m | 80 lb in |
Fuel Sender Access Panel Attaching Nuts | 10 N·m | 89 lb in |
Fuel Tank Filler Pipe Hose Clamp | 2.5 N·m | 22 lb in |
Fuel Tank Retaining Strap Bolts | 47 N·m | 35 lb ft |
Heated Oxygen (HO2S) Sensors | 36-46 N·m | 27-34 lb ft |
Idle Air Control (IAC) Valve Attaching Screws | 3 N·m | 27 lb in |
Ignition Coil Assembly to Cam Cover Bolts | 9.5 N·m | 84 lb in |
Ignition Control Module (ICM) to Ignition Coil Assembly Screws | 1.1 N·m | 9 lb in |
In-Line Fuel Filter Mounting Bracket Bolts | 20 N·m | 15 lb ft |
In-Pipe Fuel Filter Bracket Attaching Screw | 10 N·m | 89 lb in |
In-Pipe Fuel Filter Outlet Nut | 30 N·m | 22 lb ft |
Knock Sensor (KS) | 16-22 N·m | 12-16 lb ft |
Mass Air Flow (MAF) Sensor Band Clamps | 3.5 N·m | 30 lb in |
Oil Lever Indicator Tube Retaining Bolt | 9 N·m | 80 lb in |
Spark Plugs | 17-23 N·m | 13-17 lb ft |
Throttle Body to Intake Manifold Nuts | 10-14 N·m | 7-10 lb ft |
Throttle Position (TP) Sensor Attaching Screw | 2.3 N·m | 20 lb in |
Transaxle Range Switch Bolts | 28 N·m | 20 lb ft |