GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2000 🢒 Intrigue 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Hinge Replacement

Removal Procedure
  1. Open the rear compartment.
  2. Remove the rear compartment lid. Refer to Rear Compartment Lid Replacement .
  3. Remove the rear compartment lid struts. Refer to Rear Compartment Lid Strut Replacement .

    4. Object Number: 182217 Size: SH
  4. Use a grease pencil to mark the rear compartment hinge to body location.
  5. Remove the rear compartment lid hinge to body bolts.
  6. Remove the rear compartment lid hinge from the body.

Installation Procedure

    Object Number: 182217 Size: SH
  1. Align the rear compartment lid hinge to the alignment marks on the body.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the rear compartment lid hinge to rear quarter panel bolts.

    3. Tighten
    Tighten the rear compartment lid hinge to rear quarter panel bolts to 25 N·m (18 lb ft).

  3. Install the rear compartment lid struts. Refer to Rear Compartment Lid Strut Replacement .
  4. Install the rear compartment lid. Refer to Rear Compartment Lid Replacement .
  5. Close the rear compartment.