The body side door hinge has four attaching bolts. Two 13 mm (1), one Torx (2) and one 10 mm bolt (3).

Important: Do not remove the 10 mm bolt (3). A cone is attached to the back side of the hinge and may fall off into the bottom of the A-pillar. This cone is used for assembly purposes only and does not need to be removed.

The hinges are bolted to the door and the body.

The door side hinges have elongated holes which allow for some up and down and in and out adjustment.

The body side hinges have elongated holes which allows for some forward and rearward adjustment.